Instrumentation & Fittings
Needle Valve
Get a Price/Quote

Needle Valve

Request To Call Back

 

  • Bar stock construction
  • Standard Working Pressure 6000 PSI with PTFE packing. Grafoil offered for higher temperatures.
  • 10,000, 15,000 and 20,000 PSI Valves are available on Request.
  • Soft Seat Valves available on request.
  • Standard NPT End Connections. BSP / BSPT / ANPT Threads available on Request.
  • Bar Stock Construction
  • Higher working pressure will be provided upon request. (10,000 / 15,000 / 20,0000 PSI)
  • Higher working pressure will be provided upon request. (10,000 / 15,000 / 20,0000 PSI)
  • End connection: Thread Available in -  NPT | BSP | BSPT | ANPT 

 
Send Inquiry
Check Valve
Get a Price/Quote

Check Valve

Request To Call Back
  • IVI Check Valves are designed to prevent loss of media caused by failed connections and for uni-directional flow control of fluids in chemical processing, power generation, oil and gas industries.
  • Every Valve is factory tested for cracking and reseal performance
  • All Check Valves have a standard working pressure of 6000psi Heat Code Traceability.
  • Variety of End connections includes NPT, BSPP, BSPT and Tube Ends for sizes ranging from 1/8inch to 1inch
  • Maximum working pressure of 10000psi is available upon request
  • Every Valve is tested for both, crack and reseal
  • Choice of cracking pressure from 1/3 to 25psi
  • Standard material: Stainless Steel 316, Brass, Hastelloy C 276, Inconel 625 and Monel 400.
  • Valves has been designed to stop loss of media created by wrong/failed connections and for unidirectional flow control in continuous running plant like chemical, power generation, oil and gas industries.
  • 100 percent  tested valves
  • End Connection: NPT | BSP | BSPT
  • Range: From 1/8inch  to 1inch
  • Working Pressure: 1000 (Standard) Higher working pressure will be available upon request.
  • MOC: SS316 | SS304 | CS | Brass | Customized all type of material will be provided if required.

Send Inquiry
Tube To Male Pipe Fittings
Get a Price/Quote

Tube To Male Pipe Fittings

Request To Call Back

SPECIFICATION

 

  • All type of standard fittings mentioned as per below table.
  • Precision and CNC work Finishing.
  • Non-standard fittings will also be provided upon request.
  • Material: SS316 | SS 304 | CS | BRASS | All Customized material required will be provided upon request.

 

  •  FRACTIONAL TUBING:1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1" in OD
  • METRIC TUBING:3, 6, 8, 10, 12, 14, 16, 18, 20,22,25 in mm
  • STANDARD THREAD:BSP, NPT, BSPT, UNC/AS, UNF, Metric & Other Threads


Send Inquiry
Brass Compression Fitting
Get a Price/Quote

Brass Compression Fitting

Request To Call Back

SPECIFICATION

 

  • All type of standard fittings mentioned as per below table.
  • Precision and CNC work Finishing.
  • Non-standard fittings will also be provided upon request.
  • Material: SS316 | SS 304 | CS | BRASS | All Customized material required will be provided upon request.

 


  • FRACTIONAL TUBING:1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1" in OD
  • METRIC TUBING:3, 6, 8, 10, 12, 14, 16, 18, 20,22,25 in mm
  • STANDARD THREAD:BSP, NPT, BSPT, UNC/AS, UNF, Metric & Other Threads


Send Inquiry
Pipe Fittings
Get a Price/Quote

Pipe Fittings

Request To Call Back
  • Designed as per DIN 3015 standards
  • Has Rib designed structure to provide resistance against impact and vibration dampening
  • It will provide strength in the direction of the tube axis
It is available as per
  • Pipe OD
  • Working pressure
  • Rating,
  •  Type of materials used for piping,
  • Types of layout for piping
  • Number of piping line
Pipe Clamps Available in
  • Very light series,
  • Light series,
  • Heavy series,
  • Twin Series,
  • Construction series,
  • Saddle clamps,
  • U bolt clamps,
  • Aluminum series clamps,
  • Rail mounted clamps & so on.
Send Inquiry
Hydraulic Type Welding Nipple With O Ring Fittings
Get a Price/Quote

Hydraulic Type Welding Nipple With O Ring Fittings

Request To Call Back

SPECIFICATION

 

  • All type of standard fittings mentioned as per below table.
  • Precision and CNC work Finishing.
  • Non-standard fittings will also be provided upon request.
  • Material: SS316 | SS 304 | CS | BRASS | All Customized material required will be provided upon request.

 

 


  • FRACTIONAL TUBING:1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1" in OD
  • METRIC TUBING:3, 6, 8, 10, 12, 14, 16, 18, 20,22,25 in mm
  • STANDARD THREAD:BSP, NPT, BSPT, UNC/AS, UNF, Metric & Other Threads


Send Inquiry
AIR HEADERS
Get a Price/Quote

AIR HEADERS

Request To Call Back
We can provide different kind of air headers with the world class quality at very reasonable price. Below are the some of the standard headers which we are supplying regularly to chemical plants.


1. 8 points air headers
2. 10 points air headers
3. 12 points air headers
4. 20 points air headers.


Air headers are provided fully customized without any extra cost of designing and material used are CS | SS304 | SS316.

We prefer SS material as it has long life due to anticorrosive material. 

Send Inquiry
Spare Components
Get a Price/Quote

Spare Components

Request To Call Back

SPECIFICATION

 

  • All type of standard fittings mentioned as per below table.
  • Precision and CNC work Finishing.
  • Non-standard fittings will also be provided upon request.
  • Material: SS316 | SS 304 | CS | BRASS | All Customized material required will be provided upon request.

 


  • FRACTIONAL TUBING:1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1" in OD
  • METRIC TUBING:3, 6, 8, 10, 12, 14, 16, 18, 20,22,25 in mm
  • STANDARD THREAD:BSP, NPT, BSPT, UNC/AS, UNF, Metric & Other Threads


 


 
Send Inquiry
Precision Pipe Fitting Instruments Thread
Get a Price/Quote

Precision Pipe Fitting Instruments Thread

Request To Call Back

SPECIFICATION

 

  • All type of standard fittings mentioned as per below table.
  • Precision and CNC work Finishing.
  • Non-standard fittings will also be provided upon request.
  • Material: SS316 | SS 304 | CS | BRASS | All Customized material required will be provided upon request.

 

  •  FRACTIONAL TUBING:1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1" in OD
  • METRIC TUBING:3, 6, 8, 10, 12, 14, 16, 18, 20,22,25 in mm
  • STANDARD THREAD:BSP, NPT, BSPT, UNC/AS, UNF, Metric & Other Threads


Send Inquiry
Tube To Tube Pipe Fittings
Get a Price/Quote

Tube To Tube Pipe Fittings

Request To Call Back

SPECIFICATION

 

  • All type of standard fittings mentioned as per below table.
  • Precision and CNC work Finishing.
  • Non-standard fittings will also be provided upon request.
  • Material: SS316 | SS 304 | CS | BRASS | All Customized material required will be provided upon request

 

  •  FRACTIONAL TUBING:1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1" in OD
  • METRIC TUBING:3, 6, 8, 10, 12, 14, 16, 18, 20,22,25 in mm
  • STANDARD THREAD:BSP, NPT, BSPT, UNC/AS, UNF, Metric & Other Threads


Send Inquiry
Tube To Female Pipe Fittings
Get a Price/Quote

Tube To Female Pipe Fittings

Request To Call Back

SPECIFICATION

 

  • All type of standard fittings mentioned as per below table.
  • Precision and CNC work Finishing.
  • Non-standard fittings will also be provided upon request.
  • Material: SS316 | SS 304 | CS | BRASS | All Customized material required will be provided upon request.

 

 


  • FRACTIONAL TUBING:1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1" in OD
  • METRIC TUBING:3, 6, 8, 10, 12, 14, 16, 18, 20,22,25 in mm
  • STANDARD THREAD:BSP, NPT, BSPT, UNC/AS, UNF, Metric & Other Threads


Send Inquiry
Ball Valve
Get a Price/Quote

Ball Valve

Request To Call Back
Salient Features
  • At high Pressure Floating ball design will ensures to leak proof shut off
  • Working Pressure of 6000 PSI (Standard)
  • Max working pressure 10000 PSI (Upon Request)
  • Heat Code Traceability
  • 100% tested valve
  • End Connection   1/4" to 1" in screwed and tube end Configurations
  • Longer life without maintenance
  • Mirror Finish
  • Available in Cast Iron, Cast Steel, Stainless Steel materials.

SPECIFICATION | MATERIALS OF CONSTRUCTION

  • PARTS:Stainless Steel 304 / 316
  • BALL:Stainless Steel 304 / 316
  • PIN:Stainless Steel 304

SEAT:P.T.F.E. / CP.P.P. 

TECHNICAL SPECIFICATION

  •  CONSTRUCTION:Screwed End, Floating Ball, Soft Seated, Full Bore
  • DESIGN & MFG. STD.:As per BS 5351
  • INSPEC. & TESTING:As per BS 5146
  • END CONNECTIONS:Screwed End BSPT/NPT/BSP/Female Ends

Send Inquiry
Manifolds valves
Get a Price/Quote

Manifolds valves

Request To Call Back
We have wide variety of Manifold Valves available as per the internation quality standards. 

Range of Manifold. 
  • 2 Way ("H" Type ; "T" Type ; "R" Type)
  • 3 Way ("H" Type ; "T" Type ; "R" Type)
  • 5 way ("H" Type ; "T" Type ; "R" Type)
Material available in. Stainless Steel, CS, Duplex Stainless steel, etc.

Specification :
  • Designed for connecting impulse lines & Transmitters
  • Standard Connection : 1/2" Female NPT to 1/2" Female NPT
  • Available in Pipe to Pipe, Pipe to Flange, Flange to Flange, Direct mount, Integral mount and Base Vent mounting options.
  • Bonnet lock pin prevents accidental valve disassembly
  • 100% pressure tested for shut-off and at all seals.
  • 316 stainless steel construction for superior corrosion resistance
Send Inquiry
X


Contact Details
RK GLOBAL EXPORTER
  • FF9, Vardhini Complex, Near Hanuman Cross Road, Makarpura GIDC, Vadodara - 390010, Gujarat, India
  • Phone :08045815461
  • Mr Ritesh Shah (Director)
  • Mobile :08045815461
Send Inquiry
Send SMS

Back to top
trade india member
RK GLOBAL EXPORTER All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.